Turn on the transmitter, navigate to Page 1 of the Model setup menu, choose Internal or External RF and select [Reg].
Put the receiver into the [Reg] status.
Connect the battery to the receiver while holding the pairing button on the receiver. The red and green LEDs on the receiver are on, indicating the [Reg] status.
Receiver will appear in the Register menu. Select "Register" by pressing [Enter]
Turn off the receiver.
Use the cursor to select the RX1 [Bind].
Connect the battery to the receiver. The green LED flashes, indicating the [Bind] status. Select the RX, the green LED stays on, and the transmitter displays [Bind successful].
Confirm the pairing by pressing [Ok]. The green LED is on and the red LED is off, indicating normal operation.
