The building sequence of the electric version fuselage is basically the same as with the glider version except for the firewall, nose and servo tray; also the F20 ballast tube is not to be used.
Instead of Lite Ply F3 reinforcement plates, glue the balsa triangular sticks E4 along the edges of fuselage sides F17L and F17R. (Fig. 5)(Fig 7)
Epoxy the E3 servo tray behind the F7 fuselage former.
Epoxy the firewall E2 in place. Before you epoxy the firewall in, make sure the openings and holes in the firewall match your motor – make any changes as necessary or cut a new firewall to match your motor perfectly.
Once the bottom and upper sheeting is in place cut the fuselage sides flush with the front edge of the E2 firewall. Temporarily install your motor and use the spinner as a jig to align the E1 plywood ring; once satisfied, epoxy it in place. Sand the nose to the desired shape matching your spinner. (Fig. 9)(Fig. 10)
