Translations:KAVAN Mirai glider kit 1995mm - Instruction manual/39/en

Final fine-tuning: During the next flights trim out your MIRAI to find the optimal setting - safe climbing and good gliding. You might find it useful to program a spoiler → elevator mix (if your radio allows) that will eliminate the nose pitching when the spoiler is deployed. In general, the CG position should be located between 78–82 mm behind the wing leading edge. By moving the CG back you get better gliding performance whilst reducing the stability. It makes your model more sensitive to controls and increases the model reaction on thermal. The back CG position makes the model more difficult to fly and requires more attention from you, while a nose-heavy model is easier to fly but you will lack the performance. We recommend starting with the CG at 78 mm behind the leading edge. Beyond 82 mm the increasing lack of stability prevails over the gain of gliding performance. On windy days, you can improve the penetration of the glider version by putting additional ballast into the F20 ballast tube.