Translations:KAVAN Orion A3 glider kit 930mm - Instruction manual/20/en

Wing: Cut four or six pieces (a skilled builder could cover the entire bottom side of the wing using just one long strip of tissue; the upper side of the wing centre section and wing panels are to be covered by separate strips) of the tissue 10 mm oversized all around the outline (do not forget the upper sheets have to be wider due to the airfoil camber). Again, start with the bottom side of the wing – apply the glue/dope to the leading and trailing edges and all ribs, attach the tissue and smooth the edges with your fingertips. Cut the tissue all around the outline of the wing leaving it 4–5 mm over size. Bend and glue with thinned white glue or adhesive dope the overlapping tissue around the edges of the entire wing. You will have to cut the tissue against the wing panel joints and in short 4–8mm portions around the wing tip in order to follow the curve of the tip.