Translations:KAVAN Plus ESCs - Instruction manual/18/en
From KAVAN RC Wiki
Do not install the propeller on the motor when you test the ESC and motor for the first time to verify the correct settings on your radio. Only install your propeller after you have confirmed that the settings on your radio are correct.
Never use ruptured or punctured battery cells.
Never use battery packs that are known to overheat.
Never short circuit battery or motor terminals.
Always use proper insulation material for cable insulation.
Always use proper cable connectors.
Do not exceed the number of cells or servos specified for the ESC.
Wrong battery polarity will damage the ESC and void the warranty.
Install the ESC in a suitable location with adequate ventilation for cooling.
Use only batteries that are supported by the ESC and ensure the correct polarity before connecting.
Switch your transmitter ON first and ensure the throttle stick is in the minimum position before connecting the battery pack.
Never switch your transmitter OFF while the battery is connected to your ESC.
Only connect your battery pack just before flying and do not leave your battery pack connected after flying.
Handle your model with extreme care once the battery pack is connected and keep away from the propeller at all times. Never stand in line or directly in front of any rotating parts.
Do not immerse the ESC under the water, do not allow it to get wet while powered up.
Always fly at a designated flying site and follow the rules and guidelines set by your modeller’s club.
