Translations:KAVAN Pro ESCs - Instruction manual/29/en

From KAVAN RC Wiki

Programming the KAVAN Pro ESC with a transmitter

Entering the programming mode

Note: Please make sure the throttle channel EPA is set to -100 % when the throttle stick is at the bottom position and +100 % for the top position (or the throttle curve 0–100 %).

Enter program mode

Turn on the transmitter, move the throttle stick to the top position, and connect a battery to the ESC, 2 seconds later, the motor will beep ”B-B-” first, then emit "♪ 56712" 5 seconds later to indicate that you are in the ESC programming mode.

Select programmable items

After entering the programming, you’ll hear the following 12 kinds of beeps circularly. Move the throttle stick to the bottom position within 3 seconds after you hear some kind of beeps, you’ll enter the corresponding parameter item.

  1. "B-" Brake Type (1 short beep)
  2. "B- B-" Brake Force (2 short beeps)
  3. "B- B- B-" Voltage Cutoff Type (3 short beeps)
  4. "B- B- B- B-" LiPo Cells (4 short beeps)
  5. "B——" Cutoff Voltage (1 long beep)
  6. "B—— B-" BEC Voltage (1 long beep and 1 short beep)
  7. "B—— B- B-" Start-up Mode (1 long beep and 2 short beeps)
  8. "B—— B- B- B-" Timing (1 long beep and 3 short beeps)
  9. "B—— B- B- B- B-" Motor Direction (1 long beep and 4 short beeps)
  10. "B—— B——" Freewheeling (2 long beeps)
  11. "B—— B—— B-" Factory Reset (2 long beeps and 1 short beep)
  12. "B—— B—— B- B-" Exit (2 long beeps & 2 short beeps)
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_Pro_ESCs_-_Instruction_manual/29/en&oldid=17230"