Translations:KAVAN Pro ESCs - Instruction manual/9/en
From KAVAN RC Wiki
Throttle Signal cable (long White/Red/Black tri-colour cable or 2-wire White/Black with R-130 and R-160 HV OPTO): plug it into the TH channel on the receiver or flight controller. The White wire is for transmitting the throttle signals, the Red & Black wires are BEC output wires.
Reverse Brake Signal wire (Yellow wire): it must be plugged into any vacant channel on the receiver (when using the Reverse Brake mode) to control the ON/OFF of the Reverse Brake function.
Programming cable (short White/Red/Black Tri-colour cable): connect it to an LED program box if users want to program the ESC.
