RX 1 [Pairing]: Select [Pairing] to start the pairing process. Every few seconds, a "Pairing" voice alert will sound to confirm that you are in pairing mode. A pop-up window will display the message " Waiting for receiver...".
Switch on the receiver without holding the F/S pairing button. A window will appear with the message "Selecting Device" and the name of the receiver you have just switched on.
Scroll to the receiver name and select it. A window will appear with a message that the pairing was successful.
Turn off the transmitter and receiver.
Switch on the transmitter and then the receiver. If the green LED on the receiver is lit and the red LED is not lit, the receiver is connected to the transmitter. The pairing of the receiver and transmitter will not need to be repeated unless one is replaced.
The receiver will only be controlled by the transmitter it is paired to. Other transmitters in its vicinity do not affect its function.
The name of the selected RX1 receiver will now be displayed next to it.
The receiver is now ready for use.
If redundant wiring is required, repeat for receivers 2 and 3.
