Translations:KAVAN R10 - User manual/31/en

From KAVAN RC Wiki

First steps - stabilisation function (R10 Stabi)

  1. Create a model and make sure the connected receiver is paired with the radio.
  2. Ensure stabilisation is enabled and calibrate the gyroscope sensor of the device.
  3. Connect the servos and attach the stabilisation device to the model.
  4. Set up the mixer channel and radio switches.
  5. Determine the [Wing Type] & [Mounting Type].
  6. Check the stabilised channel outputs of the receiver in the Auto-Level mode.
  7. Check the stick control of the transmitter in the manual mode.
  8. Start the Self-Check of the receiver.
  9. Fail-safe setting.