Translations:KAVAN R6L - User manual/14/en

1. Ensure stabilisation is enabled & Complete the 6-axis calibration for the gyroscope
2. Servo connection & Build the stabilisation device for the model
3. Set up the mixer channels and input controls
4. Determine the [Wing Type] & [Mounting Type]
5. Gain and Offset settings for stabilised flight modes
6. Stabilised channel output checks in Auto-Level mode
7. Radio stick control checks in Manual mode
8. Calibration (Level, Stick Center & Range) for Stab Group 1 & 2
9. Angle Mode - Roll/Pitch Degree Configuration (Optional)