Translations:KAVAN Robin Glider Kit 495mm - Instruction manual/11/en

Wing panels

Pin the right wing panel trailing edge (6) to the building plan protected with plastic film. Glue the wing tip (7) to the trailing edge and then the right wing panel leading edge (8) - the flat side down. Cut the root rib (9) from the no. 2 bevelled balsa stick; glue it to the leading and trailing edge, so the slanted side is pointed outward and up (refer to the A-A detail). Now cut to size the wing panel ribs (10) from the No. 6 balsa stick and glue them into the notches in the leading and trailing edge and to the wing tip inner edge. Once the glue has cured, remove the wing panel from the building board and apply thin adhesive dope to the entire surface. Once the dope has cured, sand it carefully (first using the coarse sandpaper and later the fine one) to the shape of the airfoil. Build the left wing panel in the same way.