Translations:KAVAN Smart PRO AMS Alti motor switch - Instruction manual/4/en

Installation

Connect the AMS between the receiver and the electronic speed controller. To control the motor, select the appropriate channel on the receiver. Note that the sensor has high sensitivity to changes in atmospheric pressure and mechanical stress. Try to avoid any mechanical stress on the sensor. To achieve the most accurate altitude measurement, pay attention to the placement of the sensor. The device should not be exposed to direct airflow and close contact with heat-emitting objects (e.g. motors or speed controllers). As an additional function, the telemetry output can be used for setting or wireless data reading. Connect an extension cable with JR connectors between the telemetry port of the receiver and the “Data” port on the sensor.