Translations:KAVAN Smart PRO SBEC ESCs - Instruction manual/149/en
From KAVAN RC Wiki
Direction, acceleration, timing, startup power, motor type, gear ratio, motor poles - see the Motor Settings chapter.
Brake related settings - see the Brake Configuration chapter.
Prop position, positioning PWM, position hold time - see the chapter Propeller positioning.
Motor Enabled (0/1) - motor operation can be enabled or disabled based on the logical state of the specific input “IN B.2” (connector pinout from left to right: 1 = Hall sensor input, 2 = Motor enable input, 3 = 3.3V, 4 = Ground). If you choose an “InputPin Log0/1” option, you must pull the throttle low before starting the motor. On the other hand, after choosing the "Autostart Log0/1" option, the controller will start spinning as soon as the input pin state allows it and the throttle position is above the idle position.
Freewheeling - enables freewheeling/active braking motor operation.
