Translations:KAVAN Smart PRO SE4 4ch BUS servo decoder - Instruction manual/12/en
From KAVAN RC Wiki
Actual values - Displays the latest telemetry values (voltage, temperature, system status) including minimums and maximums.
System - Shows the detected serial protocol and its average frame rate.
Fadeouts/FS - Number of frame misses and time spent in fail-safe mode. The number of frame misses increases every time the interval between two consecutive servo frames noticeably exceeds the average period.
Reset Min/Max - Press left+right buttons together to reset all minimums and maximums.
Settings - Basic settings of the sensor.
Language - You can choose the language of the JETIBOX screen.
Period - You can specify a fixed servo output rate (5ms – 30ms), or automatic output rate synchronous to the serial input.
Device mode - Specify a function of the extension ports:
Ch1–Ch4: Servo - All extension ports are configured as servo outputs.
Ch4: Sensor EX - Ports 1–3 are configured as servo outputs while port 4 acts as a sensor expander (Duplex EX, EX Bus) or you can connect Hott SMART-BOX for setting in case of SUMD.
Ch1–Ch4: EX Bus - All extension ports are configured to the EX Bus protocol so that you can simply connect up to four EX Bus-compatible sensors to the device. This mode is compatible with the Duplex system.
Fail-safe Delay - Set the time period that must elapse before entering the fail-safe mode if there is no signal on the serial line.
Ch.1–Ch.4 - Here you can set the properties of each output channel. You can modify the receiver channel assignment to the outputs of the SE4. By pressing both left+right buttons, you can change the behavior if there is no signal on the serial line:
<Hold> (default) - Repeat the last known servo position.
<FS XX> - Set the servo position to a fixed value XX %.
Set Fail-safe Now - By pressing both left+right buttons, the actual servo positions will be stored as fail-safe values.
Service - In this menu you can view the device version and reset it to the default factory configuration.
