Translations:KAVAN Strike DLG 1498mm - Instruction manual/17/en

From KAVAN RC Wiki

Wing

  • Thoroughly epoxy the carbon discus-launch pin into the left (for a right-handed pilot) or right (for a left-handed pilot) wing tip. (Fig. 33)
  • Remove the covering film over the openings for the aileron servo arms in the W52 top cover plates and in the W53 bottom cover plate. Install aileron servos with arms fitted (set them to neutral with your radio on), aileron horns and linkage the same way you did with the rudder and elevator. Finally, using a piece of sticky or iron-on film seal the opening in the W53 bottom cover plates. (Fig. 34+35)
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_Strike_DLG_1498mm_-_Instruction_manual/17/en&oldid=28225"