Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/11/en

Wing

There is the wing centre section and both two wing outer panels drawn on the building plan. If you want to, you can assemble them simultaneously. Pin the left half of the tapered balsa trailing edge 3a to the building plan. Carefully match the pre-cut notches with the ribs drawn on the plan. Attach the other half of the trailing edge 3b to the 3a and check whether the notches are matching. If yes, glue the 3b to the 3a and pin down to the plan. If the notches do not match, trim the trailing edge 3b as necessary to fit. Lightly sand the CNC milled balsa ribs 1 (Det. G–G) to remove any imperfections.