Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/21/en

Horizontal tailplane

The horizontal tailplane is to be built directly on the plan protected with a clear plastic film in similar manner as the wing. Pin down the spruce trailing edge (3×5×405 mm) 11 overlapping on both two ends. Glue the balsa centre plate (3 mm – 30×80 mm) 13 to the trailing edge 11. Glue the spruce leading edges (3×5×197 mm) 10 to the centre plate and pin them down overlapping on both two ends. Cut to size and glue in place the diagonal ribs 12 made of 3×5 mm balsa stick. Start with the outer diagonal ribs first. Then proceed towards the centre of the horizontal tailplane.