Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/28/en

Insert the two beech dowels 25 (Ø4×32 mm) into the fuselage – no glue yet. The dowels will help with the correct alignment of the side covers. Apply glue to the left side of the fuselage block. Align and attach the side cover 26. You can lay the fuselage down onto your building board and weigh the cover down to cure. Insert and glue the main ballast 27 into the nose opening. Glue the other side cover 28 in place.