Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/30/en

Mark the position of the tailplane seat to the fuselage according to the building plan and glue it to the tail boom. Lay the horizontal tailplane down on the seat in order to check the tailplane was square to the fuselage sides (when looking from the nose to the tail) and also square to the longitudinal axis of the fuselage (when looking from above). Glue the rear tailplane seat (balsa 1.5 mm – 8×10 mm) 33 to the fuselage. Glue the fin 29 to the fuselage. Use the horizontal tailplane as a reference again. The fin has to be square to the horizontal tailplane and exactly in the longitudinal axis of the fuselage. Round the leading and trailing edges of the rudder 52. The brass rudder hinges 45 will be installed after dopind and covering of the model.