Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/32/en

Doping and tissue covering

Lightly sand the entire airframe with the fine sand paper. Before the frames are covered, all EXTERNAL surfaces MUST be primed with the adhesive dope (Diluted at least 1:1 with the thinner. The dope must have the viscosity of water. Never use the dope unthinned!). Use a soft flat brush to apply the dope. When dry, lightly sand all doped surfaces with the fine sandpaper. Apply the second coat and sand lightly again.