Translations:KAVAN V20 Pro - Quickstart guide/6/en

4.3" high-brightness colour backlit LCD touch screen with 800×480 px resolution
Up to 20 flight modes for perfect control of your model in all conditions
Full telemetry with data transfer from a wide range of sensors with the ability to write to an SD card
Memory for 64 models expandable via SD card
Wireless voice output telemetry
Updateable software
6 three-position switches, 2 two-position (1 momentary) switches
2 side rotary sliders, 2 momentary buttons on the rear
6 user-programmable buttons (front)
6-axis gyroscope sensor
Precision front-adjusted gimbals mounted on 10 ball bearings
Wireless Trainer mode
F.BUS port for programming servos
Model names with 15 characters
Subtrims
Reversing the servo rates direction
End-point adjustments (EPA) and rate limiting
Servo speed setting
Resetting data
Fail-safe rates
Dual rates
Setting the rates along 2 exponential curves or 21-point curves.
Freely programmable mixes
Engine shutdown
Safe idle
Logical switches
Clear user menu with customizable widgets
Servo monitor and servo tester
Three timers (stopwatch or timer)
Model run time
Transmitter operating time
Controller positions checklist on startup
Adjustable display backlight intensity
Calibration of gimbals
Sound and vibration alarms
Range check
3-receiver operation mode setting
Haptic and audio feedback and a built-in Text-To-Speech engine
USB-C simulator connection
Compatible with tuning long sticks