Translations:KAVAN V5 - Operating system ECOS user manual/43/en

• Timer can be turned ON or OFF
• Mode can work in a stopwatch (UP) or countdown (DOWN) mode.
• Alarm sets the time period after which you are notified by a beep alert.
• Start condition sets the switch position that starts the timer.
  • Always on - the timer is running continuously.
  • SA Up - the timer runs when the SA is in the Up position.
  • ! SA Up - the timer runs when the SA is not in the Up position.
  • SA – - the timer runs when the the SA is in the Centre position.
  • ! SA – - the timer runs when the the SA is not in the Centre position.
  • SA Dn- the timer runs when the SA is in the Down position.
  • ! SA Dn - the timer runs when the SA is not in the Down position.
  • SB Up - the timer runs when the SB is in the Up position.
  • ! SB Up - the timer runs when the SB is not in the Up position.
  • SB Dn- the timer runs when the SB is in the Down position.
  • ! SB Dn - the timer runs when the SB is not in the Down position.
  • SC Up - the timer runs when the SC is in the Up position.
  • ! SC Up - the timer runs when the SC is not in the Up position.
  • SC Dn- the timer runs when the SC is in the Down position.
  • ! SC Dn - the timer runs when the SC is not in the Down position.
• Reset - resets the timer to the set value (if in Down mode) or to zero (if in Up mode). It uses the same logic of assigning switches as an active condition.

---