Translations:KAVAN V5 - Operating system ECOS user manual/44/en
From KAVAN RC Wiki
Internal RF
Mode selects the radio mode according to the protocol of your receiver
OFF - the radio transmission is turned off.
ACCESS - the radio is in the ACCESS transmission protocol mode
ACCST D16 - the radio is in the ACCST D16 transmission protocol mode
Ch. Range sets the maximum channel range
CH1–8 - Available in all modes. Allows you to activate the Racing mode.
Racing mode offers superior latency (~ 4 ms), but works only with digital servos and with a maximum of 8 channels.
CH1–16 - Available in all modes.
CH1–24 - Available in ACCESS mode only.
RxNum allows you to define a custom receiver ID (00–63). The naming of the receiver is done automatically when the receiver is paired for the first time. This name can be changed at any time.
Failsafe emergency rates are available in 5 modes:
None set - the Failsafe emergency mode is turned off.
Hold - the receiver maintains the rates as they were before the signal was lost.
Custom - the receiver keeps the rate value on all channels as you preselect it. You can choose a mode on each channel separately.
No pulses - when the signal is lost, the receiver does not send a control signal to the rates on any channel. To use this type, select it from the menu and wait 9 seconds for the Fail-safe setting change to take effect.
Receiver - inherits the Fail-safe settings of your receiver.
Module - allows you to register ([Reg]) a new receiver and to check its operational range ([Rng])
