Translations:KAVAN programming card - Instruction manual/12/en

From KAVAN RC Wiki

Wiring sequence

  1. Disconnect the main battery pack from the ESC
  2. For the KAVAN ESC (with a built-in BEC), please disconnect the Rx cable (trio wires) of the ESC from your receiver, and then connect it to the program card at the top right corner position marked with “BEC”.
  3. Connect the main battery pack to the ESC
  4. The LEDs on the program card will light to show the current programmable values of the ESC.
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_programming_card_-_Instruction_manual/12/en&oldid=17008"