Do not install the propeller (fixed wing) or drive pinion (helicopter) on the motor when you test the ESC and motor for the first time to verify the correct settings on your radio. Only install your propeller (plane) or pinion (heli) after you have confirmed that the settings on your radio are correct.
Never use ruptured or punctured battery cells.
Never short circuit battery or motor terminals.
Always use proper insulation material for cable insulation.
Always use proper cable connectors.
Wrong battery polarity will damage the Card and ESC and void the warranty.
Use only batteries that are supported by the Card and ESC and ensure the correct polarity before connecting.
Handle your model with extreme care once the battery pack is connected and keep away from the propeller at all times. Never stand in line or directly in front of any rotating parts.
Do not immerse the Card under water, do not allow it to get wet while powered up.
