Jump to content

KAVAN RC Wiki

View source for Translations:KAVAN FunStik 1280mm kit - Instruction manual/62/en

← Translations:KAVAN FunStik 1280mm kit - Instruction manual/62/en

You do not have permission to edit this page, for the following reasons:

The action you have requested is limited to users in the group: Administrators.
You do not have permission to edit pages in the Translations namespace.

You can view and copy the source of this page.

43. Cut the covering film over the notches for the fin and horizontal stabilizer in the fuselage. Epoxy the fin and stabilizer in place. Remove any excessive epoxy with a paper towel wetted with rubbing alcohol immediately. Double-check the fin is square to the horizontal stabilizer.

Return to Translations:KAVAN FunStik 1280mm kit - Instruction manual/62/en.

Retrieved from "https://wiki.kavanrc.com/Translations:KAVAN_FunStik_1280mm_kit_-_Instruction_manual/62/en"