Translations:KAVAN FunStik 1280mm kit - Instruction manual/62/en: Difference between revisions

From KAVAN RC Wiki
VisualWikitext
(Importing a new version from external source)
 
(Importing a new version from external source)
 
Line 1: Line 1:
43. Cut the covering film over the notches for the fin and horizontal stabilizer in the fuselage. Epoxy the fin and stabilizer in place. Remove any excessive epoxy with a paper towel wetted with rubbing alcohol immediately. Double check the fin was square to the horizontal stabilizer.
43. Cut the covering film over the notches for the fin and horizontal stabilizer in the fuselage. Epoxy the fin and stabilizer in place. Remove any excessive epoxy with a paper towel wetted with rubbing alcohol immediately. Double-check the fin is square to the horizontal stabilizer.

Latest revision as of 09:25, 8 January 2025

Message definition (KAVAN FunStik 1280mm kit - Instruction manual)
43. Cut the covering film over the notches for the fin and horizontal stabilizer in the fuselage. Epoxy the fin and stabilizer in place. Remove any excessive epoxy with a paper towel wetted with rubbing alcohol immediately. Double-check the fin is square to the horizontal stabilizer.

43. Cut the covering film over the notches for the fin and horizontal stabilizer in the fuselage. Epoxy the fin and stabilizer in place. Remove any excessive epoxy with a paper towel wetted with rubbing alcohol immediately. Double-check the fin is square to the horizontal stabilizer.

Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_FunStik_1280mm_kit_-_Instruction_manual/62/en&oldid=29620"