Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/28/cs: Difference between revisions

Latest revision as of 13:29, 11 December 2024

Message definition (KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual)

Insert the two beech dowels '''25''' (Ø4×32 mm) into the fuselage – no glue yet. The dowels will help with the correct alignment of the side covers. Apply glue to the left side of the fuselage block. Align and attach the side cover '''26'''. You can lay the fuselage down onto your building board and weigh the cover down to cure. Insert and glue the main ballast '''27''' into the nose opening. Glue the other side cover '''28''' in place.

Na sucho, bez lepení zasuňte 2 bukové kolíky 25 (Ø4×32 mm) do hlavice trupu. Tyto kolíky poslouží k přesnému umístění bočních krytů hlavice. Na jednu stranu hlavice trupu naneste lepidlo a na bukové kolíky nasaďte boční kryt trupu 26 a přitiskněte jej k hlavici. Oba lepené díly můžete položit na pracovní desku a zatížit je závažím. Do hlavice trupu vložte a zalepte zátěž 27. Obdobným způsobem přilepte i druhý boční kryt trupu 28.

Revision as of 12:32, 20 May 2024 (view source) Mrs. Kavan (talk \| contribs) No edit summary ← Older edit	Latest revision as of 13:29, 11 December 2024 (view source) FuzzyBot (talk \| contribs) m (FuzzyBot moved page Translations:KAVAN TARA A1 (F1H) - Instruction manual/28/cs to Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/28/cs without leaving a redirect: Part of translatable page "KAVAN TARA A1 (F1H) - Instruction manual")
(One intermediate revision by the same user not shown)
(No difference)