Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/29/fr: Difference between revisions

Latest revision as of 13:29, 11 December 2024

Message definition (KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual)

Glue the reinforcement plate '''30''' into the fin '''29'''. Make the front horizontal tailplane seat. Glue the spruce stick (3×5×25 mm) '''32''' to the Plywood plate (1 mm - 25×15 mm) '''31'''.

Collez la plaque de renfort 30 dans la dérive 29. Préparez le support horizontal avant de l’empennage. Collez la baguette en épicéa (3×5×25 mm) 32 à la plaque en contreplaqué (1 mm - 25×15 mm) 31.

Revision as of 08:24, 30 October 2024 (view source) Mr. KAVAN FR (talk \| contribs) (Created page with "Collez la plaque de renfort '''30''' dans la dérive '''29'''. Fabriquez le support horizontal avant de l’empennage. Collez la baguette en épicéa (3×5×25 mm) '''32''' à la plaque en contreplaqué (1 mm - 25×15 mm) '''31'''.")		Latest revision as of 13:29, 11 December 2024 (view source) FuzzyBot (talk \| contribs) m (FuzzyBot moved page Translations:KAVAN TARA A1 (F1H) - Instruction manual/29/fr to Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/29/fr without leaving a redirect: Part of translatable page "KAVAN TARA A1 (F1H) - Instruction manual")
(One intermediate revision by one other user not shown)
Line 1:		Line 1:
	Collez la plaque de renfort '''30''' dans la dérive '''29'''. ~~Fabriquez~~ le support horizontal avant de l’empennage. Collez la baguette en épicéa (3×5×25 mm) '''32''' à la plaque en contreplaqué (1 mm - 25×15 mm) '''31'''.		Collez la plaque de renfort '''30''' dans la dérive '''29'''. Préparez le support horizontal avant de l’empennage. Collez la baguette en épicéa (3×5×25 mm) '''32''' à la plaque en contreplaqué (1 mm - 25×15 mm) '''31'''.