Translations:KAVAN M+ - User manual/22/fr: Difference between revisions

Latest revision as of 11:13, 20 October 2025

Message definition (KAVAN M+ - User manual)

{{Note|type=info|'''Note:''' If the fail-safe is not set, the model will always operate with the last functional state of the channels before the signal loss. This could potentially cause damage. If the fail-safe is disabled on the RF module side, the receiver will go to the default Hold mode. Do not set the Fail-safe mode for the S.BUS port to No Signal mode, as the signal would be continuously transmitted. Set the S.BUS port to Hold or Custom mode instead.}}

Remarque : Si aucun Fail-safe n’est configuré, le modèle conservera les dernières positions actives avant la perte de signal, ce qui peut causer des dommages. Si le Fail-safe est désactivé sur le module RF, le récepteur passera par défaut en mode Hold. Ne réglez pas le port S.BUS sur No Signal, car le signal serait transmis en continu. Préférez les modes Hold ou Custom.