Translations:KAVAN FunStik 1280mm kit - Instruction manual/62/en: Difference between revisions
Importing a new version from external source |
Importing a new version from external source |
||
| Line 1: | Line 1: | ||
43. Cut the covering film over the notches for the fin and horizontal stabilizer in the fuselage. Epoxy the fin and stabilizer in place. Remove any excessive epoxy with a paper towel wetted with rubbing alcohol immediately. Double check the fin | 43. Cut the covering film over the notches for the fin and horizontal stabilizer in the fuselage. Epoxy the fin and stabilizer in place. Remove any excessive epoxy with a paper towel wetted with rubbing alcohol immediately. Double-check the fin is square to the horizontal stabilizer. | ||
Latest revision as of 10:25, 8 January 2025
43. Cut the covering film over the notches for the fin and horizontal stabilizer in the fuselage. Epoxy the fin and stabilizer in place. Remove any excessive epoxy with a paper towel wetted with rubbing alcohol immediately. Double-check the fin is square to the horizontal stabilizer.