Translations:KAVAN Beta 1400 - Instruction manual/102/sk: Difference between revisions

Latest revision as of 09:04, 26 September 2024

Message definition (KAVAN Beta 1400 - Instruction manual)

The levator controls the model on the vertical axis. Push up the elevator, and your model’s nose will rise (and the model will climb if it has sufficient power). Pull down the elevator, and your model will descend. Please note that your model can only climb if enough throttle is applied. Your model will not necessarily climb just because you have pushed up the elevator and will usually need full power applied for a safe, gentle climb. If the climb angle is too great or the power applied is insufficient, your model will lose flying speed until the minimum (stall) speed. At the stalling speed (when the airflow starts to break away from the upper surface of the wing), your model will start to feel as though it is not responding as normal to control inputs and then drop with little warning – pull down the elevator to regain flying speed and full normal control.

Výškovka riadi model vo vertikálnej rovine. Jemným pritiahnutím ovládača výškovky k sebe dosiahnete stúpania modelu, naopak jemným potlačením ovládače od seba klesania. Model však nie je schopný trvalo stúpať len v dôsledku vychýlenia výškovky, potrebuje k tomu energiu dodávanú motorom. Ak teda chcete stúpať, musíte pridať plyn - v opačnom prípade model začne strácať rýchlosť, a ak by ste včas nezasiahli, mohol by sa zrútiť práve v dôsledku straty rýchlosti.