Translations:KAVAN Vinx free flight glider 600mm kit - Instruction manual/74/cs: Difference between revisions

Latest revision as of 06:33, 28 August 2025

Message definition (KAVAN Vinx free flight glider 600mm kit - Instruction manual)

70. Cut a piece of the iron-on film overlapping the outline of the wing centre section by ca 1 cm. Punch two holes through each rib with a modelling pin in places indicated by arrows.

70. Připravte si nažehlovací fólii s přesahem cca 1 cm po obvodu středové části křídla. V místě šipek udělejte v žebrech dva otvory pomocí špendlíku.

Revision as of 13:26, 27 August 2025 (view source) Mrs. Kavan (talk \| contribs) (Created page with "70. Připravte si nažehlovací fólii s přesahem cca 1 cm po obvodu středové části křídla. V místě šipek udělejte v žebrech dva otvory pomocí špendlíku.")	Latest revision as of 06:33, 28 August 2025 (view source) FuzzyBot (talk \| contribs) m (FuzzyBot moved page Translations:Vinx – Instruction Manual/74/cs to Translations:KAVAN Vinx free flight glider 600mm kit - Instruction manual/74/cs without leaving a redirect: Part of translatable page "Vinx – Instruction Manual")
(No difference)