Jump to content

Translations:KAVAN S15-S180A/R FS30-FS180AR - Instruction Manual/67/cs: Difference between revisions

From KAVAN RC Wiki
No edit summary
No edit summary
 
(No difference)

Latest revision as of 16:13, 3 November 2025

Message definition (KAVAN S15-S180A/R FS30-FS180AR - Instruction Manual)
=== Engine Maintenance ===
To ensure maximum engine life, reliability and performance, follow these guidelines: 
# Always drain the tank at the end of the flight session. 
# Turn on the glow plug and try to start the engine again to burn off any fuel remaining inside. Repeat as long the engine starts. Remove any fuel residue by cranking the engine for 4-5 seconds while the engine is still hot. 
# Finally, inject „straight“ fuel (containing no nitromethane) into the engine. Crank the engine several times by hand to make sure it turns freely, and then crank the starter for 4-5 seconds to ensure that all friction surfaces are lubricated. If you are using a nitromethane containing fuel, this flushing with non-nitromethane fuel is a very useful habit to eliminate the corrosive effects of incompletely burned fuel residue that would otherwise build up in the engine. 
# This procedure will reduce the risk of starting difficulties caused by internal corrosion after extended periods of storage. Before storing the engine out of operation for a longer period of time, it is advisable to treat the engine with a few drops of After Run oil.

Údržba motoru

Pro zajištění maximální životnosti, spolehlivosti a výkonu motoru dodržujte následující zásady:

  1. Na konci letového dne vždy vyprázdněte nádrž.
  2. Připojte žhavení a zkuste motor znovu nastartovat, abyste spálili všechno nasáté palivo. Opakujte, dokud motor chytá. Zbytky paliva odstraňte protáčením motoru startérem 4-5 vteřin, dokud je motor ještě horký.
  3. Nakonec do motoru vstříkněte čisté palivo. Protočte motor několikrát rukou, abyste se přesvědčili, že se volně otáčí a potom protočte 4-5 vteřin startérem pro zajištění promazání všech třecích ploch. Pokud létáte na palivo s nitromethanem, je toto propláchnutí palivem bez nitromethanu velmi užitečným zvykem eliminujícím korosivní účinky zbytků nedokonale spáleného paliva, které by se jinak usazovaly v motoru.
  4. Tento postup omezí nebezpečí obtíží při startování způsobených vnitřní korozí po delší době skladování. Před delším uložením motoru mimo provoz je vhodné motor ošetřit několika kapkami After Run oleje.