Translations:KAVAN Pilatus PC-6 Porter - Instruction manual/25/de: Difference between revisions

From KAVAN RC Wiki
(Created page with "=== Fernsteuerungseinbau und Vorflug check === {| class="wikitable" style="float:right;margin-left:1em;" |+ ! rowspan="2" |'''Empfohlene Ausschläge''' ! colspan="2" |'''**Niedrige Rate''' ! colspan="2" |'''Hohe Rate''' |- |'''Rate''' |'''Expo''' |'''Rate''' |'''Expo''' |- |Querruder |±11 mm |30 % |±15 mm |30 % |- |Höhenruder |±11 mm |30 % |±20 mm |30 % |- |Seitenruder |±16 mm |20% |±25 mm |20 % |- |Klappen | colspan="4" |Abflug: -10 mm nach unten / Landung: -22 m...")
 
No edit summary
 
Line 25: Line 25:
|Seitenruder
|Seitenruder
|±16 mm
|±16 mm
|20%
|20 %
|±25 mm
|±25 mm
|20 %
|20 %

Latest revision as of 06:21, 7 May 2024

Message definition (KAVAN Pilatus PC-6 Porter - Instruction manual)
=== RC kit installation and pre-flight check ===
{| class="wikitable" style="float:right;margin-left:1em;"
|+
! rowspan="2" |'''Recommended throws'''
! colspan="2" |'''*Low Rate'''
! colspan="2" |'''High Rate'''
|-
|'''Rate'''
|'''Expo'''
|'''Rate'''
|'''Expo'''
|-
|Ailerons
|±11 mm
|30 %
|±15 mm
|30 %
|-
|Elevator
|±11 mm
|30 %
|±20 mm
|30 %
|-
|Rudder
|±16 mm
|20 %
|±25 mm
|20 %
|-
|Flaps
| colspan="4" |Take-off: -10 mm down / Landing: -22 mm down
|}
* Referring to the instruction manual of your radio, carefully hook up the on-board electronics.
* Once everything has been correctly connected, turn on your transmitter and plug in the flight pack. Check the neutral positions and throws of all control surfaces. If you need to make the control surface throws smaller, simply move the pushrod closer to the centre on the servo arm or move it far from the control surface on the control horn. And vice versa.<br><br><br>
{{Note|type=info|text='''*)''' The "Low rate" recommended control surface throws are suitable for a less skilled pilot and regular "scale-ish" flying; the "High rate" setting allows an experienced pilot to explore the full capabilities of his model.}}

Fernsteuerungseinbau und Vorflug check

Empfohlene Ausschläge **Niedrige Rate Hohe Rate
Rate Expo Rate Expo
Querruder ±11 mm 30 % ±15 mm 30 %
Höhenruder ±11 mm 30 % ±20 mm 30 %
Seitenruder ±16 mm 20 % ±25 mm 20 %
Klappen Abflug: -10 mm nach unten / Landung: -22 mm nach unten
  • Informationen zur Installation und Programmierung des RC-Sets finden Sie in der Bedienungsanleitung. Schließen Sie nach der vollständigen Montage des Modells die RC-Anlage an und testen Sie Servo- und Reverse-Schalter- Funktion. Wenn ein Ruder zu große Ausschläge aufweist, hängen Sie das Gestänge am Servohebel näher an der Mitte ein – oder am Ruderhebel weiter vom Drehpunkt weg. Wenn andererseits der Ausschlag zu gering ist, machen Sie das Gegenteil.


*) Die in der Tabelle angegebenen kleineren Ausschläge eignen sich für weniger erfahrene Piloten und normales Fliegen. Große Ausschläge sind für erfahrene Piloten konzipiert, sodass sie die Kunstflug-Fähigkeit des Modells voll ausnutzen können.