Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/32/en: Difference between revisions
m (FuzzyBot moved page Translations:TARA Glider Kit A1 (F1H) - Instruction manual/32/en to Translations:KAVAN TARA A1 (F1H) - Instruction manual/32/en without leaving a redirect: Part of translatable page "TARA Glider Kit A1 (F1H) - Instruction manual") |
m (FuzzyBot moved page Translations:KAVAN TARA A1 (F1H) - Instruction manual/32/en to Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/32/en without leaving a redirect: Part of translatable page "KAVAN TARA A1 (F1H) - Instruction manual") |
(No difference)
| |
Latest revision as of 13:29, 11 December 2024
Doping and tissue covering
Lightly sand the entire airframe with the fine sand paper. Before the frames are covered, all EXTERNAL surfaces MUST be primed with the adhesive dope (Diluted at least 1:1 with the thinner. The dope must have the viscosity of water. Never use the dope unthinned!). Use a soft flat brush to apply the dope. When dry, lightly sand all doped surfaces with the fine sandpaper. Apply the second coat and sand lightly again.