Translations:KAVAN C20 Duo - Instruction manual/10/de: Difference between revisions

Revision as of 09:57, 22 September 2025

Message definition (KAVAN C20 Duo - Instruction manual)

* Do not leave the charger unattended while charging. If any malfunction occurs, TERMINATE THE PROCESS AT ONCE and refer to the operation manual.
* Disconnect the battery if it becomes hot immediately. Allow the battery to cool down before reconnecting.
* Do NOT attempt to charge incompatible types of rechargeable batteries or even dry (alkaline, zinc-carbon) batteries. This charger is designed to only charge and discharge Nickel-Cadmium, Nickel-Metal Hydride, Lithium-Ion, Lithium-Polymer (regular and HV), LiFePO4, and Lead-Acid batteries.
* Never attempt to charge or discharge the following types of batteries.
* A battery pack which consists of different types of cells (including different manufacturers).
* Non-rechargeable batteries (Explosion hazard).
* Batteries that require a different charge technique from NiCd, NiMH, LiPo, LiHV or Pb.
* A faulty or damaged battery.
* A battery fitted with an integral charge circuit or a protection circuit.
* Batteries installed in a device or which are electrically linked to other components.
* Batteries that are not expressly stated by the manufacturer to be suitable for the currents the charger delivers during the charge process.
* Keep the charger well away from dust, damp, rain, heat, direct sunshine and vibration. Never drop it.
* Do not allow foreign objects into the charger.
* The allowable AC input voltage is 100-240 V/50-60 Hz or 11-18 V DC voltage. DO NOT try to feed the charger simultaneously using the AC and DC input.
* This charger and the battery should be put on a firm level, heat-resistant, non-flammable and nonconductive surface. Never place them on a car seat, carpet or similar.
* Keep all the inflammable volatile materials away from operating area.
* Do not cover the air intake holes on the charger, as this could cause the charger to overheat.
* Make sure you know the specifications of the battery to be charged or discharged to ensure it meets the requirements of this charger. If the program is set up incorrectly, the battery and charger may be damaged. It can cause fire or explosion due to overcharging.
* Do not attempt to charge batteries at excessive fast charge currents. Check with your battery manufacturer for the maximum charge rate applicable to your battery.
* Do not use automotive type battery chargers to power the charger.
* Do not disassemble the charger.
* This appliance is not intended for use by young children or uninformed persons unless they were adequately supervised by a responsible adult person to ensure that they can use the appliance safely.

@@ Line 1: / Line 1: @@
 *
+*
+*
+*
+*
+*
+*
 *