Jump to content

Translations:KAVAN AP09A - Instruction Manual/44/cs: Difference between revisions

From KAVAN RC Wiki
No edit summary
FuzzyBot (talk | contribs)
(No difference)

Revision as of 11:25, 15 October 2025

Message definition (KAVAN AP09A - Instruction Manual)
==== 8. Propeller Installation ====
The propeller fits onto the engine‘s crankshaft. If it does not fit, use a propeller reamer, tapered reamer to open the hole slightly. Do NOT oversize the hole. Once the propeller has been positioned on the shaft, use the spinner nut to retain the propeller. To tighten the nut, slide a screwdriver or other device through the hole in the end of the nut.

8. Montáž vrtule

Pokud je třeba, upravte otvor vrtule na průměr 5 mm. Nasaďte vrtuli na hřídel a pevně, ale s citem, dotáhněte hliníkovou matici.