Translations:KAVAN FT160AR - Instruction Manual/112/cs: Difference between revisions

Revision as of 11:25, 15 October 2025

Message definition (KAVAN FT160AR - Instruction Manual)

==== Mixture Control Valve Fine Setting ====
Start the engine as described above, slowly close the throttle, and set the idle speed. Hold the model in a horizontal position and slowly lift the nose of the model up.
# If the engine revs up, you need to close the mixture control valve and repeat the procedure until the rpm does not change when the model is raised.
# If the engine runs irregularly or stalls, open the mixture control valve slightly. Repeat the procedure again until everything is fine.

Nastavení volnoběžné jehly za chodu motoru

Nastartujte motor výše popsaným postupem, pomalu zavírejte plyn, nastavte volnoběh. Držte model ve vodorovné poloze a pomalu zvedejte příď modelu vzhůru.

Revision as of 16:00, 5 August 2025 view source Mrs. Kavan (talk \| contribs) Interface administrators, Administrators, translator 19,448 edits Created page with "==== Nastavení volnoběžné jehly za chodu motoru ==== Nastartujte motor výše popsaným postupem, pomalu zavírejte plyn, nastavte volnoběh. Držte model ve vodorovné poloze a pomalu zvedejte příď modelu vzhůru."		Revision as of 11:25, 15 October 2025 view source FuzzyBot (talk \| contribs) 14,395 edits m FuzzyBot moved page Translations:Kavan FT160AR - Instruction Manual/112/cs to Translations:KAVAN FT160AR - Instruction Manual/112/cs without leaving a redirect: Part of translatable page "Kavan FT160AR - Instruction Manual" Newer edit →
(No difference)