Translations:KAVAN S15-S180A/R FS30-FS180AR - Instruction Manual/55/de: Difference between revisions

Revision as of 11:26, 15 October 2025

Message definition (KAVAN S15-S180A/R FS30-FS180AR - Instruction Manual)

# Install the propeller specified for your model. Open the needle-valve 1-1/2 turns from the fully closed position and start the engine. Let it run for two or three minutes at the minimum speed at which it will run with a rich mixture.
# Close the needle-valve until the engine is running; let it run for 10 seconds, then open the needle to its original position for another 10 seconds. Repeat this procedure until the tank is used up.
# Set a reliable idle according to the Idle Adjustment diagram below.
# Restart, open the needle-valve about 1/2 to 1 turn, and let it run for three or four tanks.
# During subsequent flights (or engine starts), gradually close the needle- -valve to the optimal position. After six to ten flights, the engine should run reliably at the optimal setting. Do not rush the running-in process - the engine will reward you for this little care with good performance and long term reliable operation.

1. Montieren Sie die für Ihr Modell geeignete Luftschraube. Öffnen Sie die Hauptnadel um 1-1/2 Umdrehungen von der vollständig geschlossenen Position und starten Sie den Motor. Lassen Sie den Motor zwei oder drei Minuten lang mit der minimalen Drehzahl laufen, bei der er noch mit fettem Gemisch läuft.