KAVAN Mirai V-tail glider kit 1995mm - Instruction manual: Difference between revisions
Mrs. Kavan (talk | contribs) No edit summary |
Mrs. Kavan (talk | contribs) |
||
| Line 17: | Line 17: | ||
{{Note|'''Note:''' We, as the kit manufacturer, can provide you with a top quality kit and instructions, but ultimately the quality and flyability of your finished model depends on how you build it. We cannot in any way guarantee the performance of your completed model, and no representations are expressed or implied as to the performance or safety of your completed model.|type=info}} | {{Note|'''Note:''' We, as the kit manufacturer, can provide you with a top quality kit and instructions, but ultimately the quality and flyability of your finished model depends on how you build it. We cannot in any way guarantee the performance of your completed model, and no representations are expressed or implied as to the performance or safety of your completed model.|type=info}} | ||
=== Specification === | |||
{| class="wikitable" | |||
|'''Wingspan''' | |||
|1995 mm | |||
|- | |||
|'''Length''' | |||
|1210 mm | |||
|- | |||
|'''All–up weight''' | |||
|420 g plus | |||
|- | |||
|'''Wing section''' | |||
|Special RES HB | |||
|- | |||
|'''CG position''' | |||
|80 mm | |||
|- | |||
|'''Controls''' | |||
|Rudder, elevator, airbake, (motor) | |||
|} | |||
=== Recommended RC equipment === | |||
* Rudder and elevator servo: Hitec HS-53 2× | |||
* Spoiler servo: Hitec HS-65MG, Dymond D47 | |||
* Receiver battery: Panasonic Eneloop AAA 800mAh 4.8 V pack | |||
Revision as of 10:19, 23 April 2024
Introduction
Precautions
This RC model is not a toy. Use it with care and strictly following the instructions in this manual.
Assemble this model following strictly these instructions. DO NOT modify or alter the model. Failure to do so, the warranty will lapse automatically. Follow the instructions in order to obtain a safe and solid model at the end of the assembly.
Children under the age of 14 must operate the model under the supervision of an adult.
Assure that the model is in perfect conditions before every flight, taking care that all the equipment works correctly and that the model is undamaged in its structure.
Fly only in days with light breeze and in a safe place away from any obstacles.
You must build the model according to the instructions. Do not alter or modify the model, as doing so may result in an unsafe of unflyable model. Take time to build straight, true and strong. Use proper radio and other equipment that is in first class condition, properly install all the components and test their correct operation before first and any further flight. Fly the model only with competent help from a well experienced modeller if you are not already an experienced RC pilot.
Specification
| Wingspan | 1995 mm |
| Length | 1210 mm |
| All–up weight | 420 g plus |
| Wing section | Special RES HB |
| CG position | 80 mm |
| Controls | Rudder, elevator, airbake, (motor) |
Recommended RC equipment
- Rudder and elevator servo: Hitec HS-53 2×
- Spoiler servo: Hitec HS-65MG, Dymond D47
- Receiver battery: Panasonic Eneloop AAA 800mAh 4.8 V pack