FrSky VANTAC RF007 - Návod k použití
Úvod
FrSky VANTAC RF007 je špičková letová flybarless (FBL) jednotka, která využívá nejnovější technologii Rotorflight 2.X. Díky zabudovanému přijímači s protokolem Access nebo Twin 2.4GHz poskytuje rozsáhlou škálu funkcí a zároveň umožňuje intuitivní konfiguraci, bezproblémové nastavení a ladění v reálném čase prostřednictvím rádiového rozhraní ETHOS.
Rotorflight technologie a komplexní možnosti
Jádrem RF007 je procesor MCU STM32F722 podpořený tříosým gyroskopem, tříosým akcelerometrem a barometrem. Tyto součásti se starají o přesnost a stabilitu poskytující pilotům maximální sebevědomí a důvěru v jejich mašinu. Řídicí jednotka navíc podporuje záznam letových dat pomocí objemné 128MB černé skříňky nabízející dostatek informací pro ladění a řešení problémů.
Integrovaný přijímač FrSky a podpora externího přijímače
RF007 je vybaven vestavěným přijímačem FrSky, který spárujete přímo s vysílačem KAVAN nebo FrSky. Tím odpadá potřeba externího přijímače. Verze RF007 Archer obsahuje 2.4GHz Archer Plus RS přijímač pracující v režimu ACCESS nebo ACCST V2. Verze RF007 Twin má zabudovaný přijímač R6 Twin 2.4GHz pracující v režimu Twin. Interní přijímač je propojen přes UART sběrnici komunikující na protokolu FBUS. Pro uživatele s jinými požadavky lze přijímač připojit také prostřednictvím hlavního panelu nebo některého z rozšiřujících portů. Rotorflight podporuje širokou škálu protokolů přenosu signálu přijímače. Úplný seznam podporovaných protokolů naleznete v nástroji Rotorflight Configurator nebo na https://rotorflight.org.
Programování/ladění za chodu pomocí ETHOS Lua
Díky konektivitě telemetrie nabízí Rotorflight integrované a vysoce intuitivní konfigurační nástroje založené na jazyce Lua, které spustíte přímo na vysílači ETHOS. Pomocí těchto nástrojů lze rychle a snadno ladit a měnit nastavení PID, trimů, výchylek, mixů/geometrie, nastavení filtrů a většinu dalších parametrů Rotorflight přímo v rozhraní rádia. Podporované regulátory otáček lze pomocí konfiguračního nástroje rovněž konfigurovat.
Pro stažení konfiguračních nástrojů navštivte:
Overview
Technical specifications
| Firmware | Rotorflight 2.x |
| Dimensions | 43.5×31.2×13.7 mm |
| Weight | 25.2 g |
| Built-in receiver | RF007 ARCHER+: 2.4G Archer Plus RS / RF007 TWIN: Dual 2.4G TW R6 |
| Operating voltage | 5–16 V |
| Operating current | 125 mA @ 5 V |
| Operating frequency | 2.400–2.4835 GHz |
| Max. radiated power | < 20 dBm |
| Voltage measurement range via AIN (external device) | 0–80 V |
| RxUG Port | For Upgrading Internal RX Firmware (In case of OTA upgrade failure)
Note: When powering this RxUG port, do not introduce additional power input from other ports to ensure the safe operation of the connected devices. |
| MCU | STM32F722RET6 |
| Gyroscope (IMU) | ICM-42688P |
| Barometer | SPL06-001 |
| Black box flash | 128 MB |
| Servo ports | Servo 1, Servo 2, Servo 3, Tail |
| ESC ports | ESC (throttle), RPM (sensor), TLM (ESC telemetry or other functions) |
| Other ports | AUX and SBUS Out/In |
| Expansion ports | Port A, C, and RxUG |
Features
- Runs Rotorflight 2.x helicopter control software
- Built-in FrSky FBUS-capable receiver (AP, TW, or TD protocol)
- Robust CNC aluminium case, functional heatsink for MCU
- STM32F722 microcontroller for power and flexibility
- Precision barometer, 3-axis gyroscope and 3-axis accelerometer
- 128MB black box function for tuning/troubleshooting
- 9 primary main header pins for flexibility and power distribution
- Multiple JST-GH expansion ports for UART/I2C devices
- JST-GH port for VBAT sensing input Up to 80 V
- Capable of multiple ESC protocols (PWM, Dshot, Oneshot, Multishot)
- Capable of multiple receiver protocols and telemetry
- Supports tail motor or tail ESC
- Supports integrated configuration and setup with ETHOS Lua scripts
Accessing RF007 configuration by Rotorflight Lua on ETHOS radios
Preparation: Ensure that the ETHOS system and Rotorflight Lua tools are always updated to the latest version.
 |
 |
| Bind the built-in receiver of the RF007 to your transmitter and ensure the Telemetry port is set to FBUS mode. | Download the latest Release version .zip file of the Rotorflight Lua scripts. There are two versions available. The text-based version is a simplified system similar to other integration tools with more dense information, whereas the touchscreen version “Suite” is a more user-friendly tool based on the Lua Forms system and offers some additional features. |
 |
 |
| Use Ethos Suite to Install the downloaded .zip file. | Or extract the downloaded Lua files, and place the extracted folder into the Scripts folder of the ETHOS transmitter. |
 |
 |
| Go to the Lua Tasks menu on the ETHOS transmitter. | Set the installed functions to On under Lua Tasks bar. |
 |
 |
| Before opening the configuration tools, ensure you have powered the system and Discovered telemetry sensors. | Go to the System menu and access the Rotorflight Lua scripts. |
How to flash/update the FC Firmware
To update, modify, or reinstall the FC firmware, please follow the detailed instructions on the Rotorflight Wiki: https://www.rotorflight.org/docs/setup/flashing-the-firmware.
Install Rotorflight Configurator: Start by downloading and installing the latest Rotorflight Configurator release download (https://github.com/rotorflight/ rotorflight-configurator/releases). This walk-through uses Windows, but it should also work on Linux or macOS.
Install Drivers: On Windows, install the STM USB VCP Drivers from the links on the Rotorflight Configurator page.
Flash Firmware to FC: Connect the FC to your computer with an USB data cable. Now you are ready to install the Rotorflight firmware to your FC. Open the Rotorflight configurator and click on Update Firmware.
- Choose All release and Snapshots from the dropdown. (Note: Snapshots are for development and testing purposes. They may contain bugs!! Rotorflight recommends using snapshot firmware with care and to assist the project with testing. Choose "Releases" if you would rather use the latest stable firmware)
- Select the Target you identified in Step 1. You can also click on the "Detect" button to auto detect the target.
- Select Full chip erase, this will remove all previous configurations.
- Click on Load firmware[online]
- Check and confirm the target board is correct.
- Click on Flash Firmware.
- When the programming is successful click on Connect.
Recycling and waste disposal note (European Union)
Electrical equipment marked with the crossed-out waste bin symbol must not be discarded in the domestic waste; it should be disposed of via the appropriate specialised disposal system. In the countries of the EU (European Union) electrical devices must not be discarded via the normal domestic waste system (WEEE - Waste of Electrical and Electronic Equipment, Directive 2012/19/EU). You can take your unwanted equipment to your nearest public collection point or recycling centre, where it will be disposed of in the proper manner at no charge to you. By disposing of your old equipment in a responsible manner you make an important contribution to the safeguarding of the environment.
EU declaration of conformity (European Union)
Hereby, FrSky Electronic Co., Ltd declares that the Vantac RF007 is in compliance with the essential requirements as laid down in the EU directive(s) concerning electromagnetic compatibility. The full text of the EU Declaration of Conformity is available at www.kavanrc.com/doc.
Guarantee
The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.