KAVAN C50 Duo - Instruction manual

Introduction

Congratulations on purchasing the KAVAN C50 Duo dual-channel DC balance charger. This unit is simple to use; however, the proper operation of this charger, as well as the correct usage of your batteries, requires some knowledge on the part of the user. Therefore, it is important to read right through the Operating instructions and Warning and safety notes before you attempt to use your new charger for the first time. We hope you have many years of pleasure and success with your new battery charger.

Charger set contents

KAVAN C50 Duo charger
Instruction manual

Warnings and safety notes

For your safety and a better user experience, please read this manual and follow the instruction before using the new charger.
This is not a toy. This appliance is not intended for use by young children under 14 years of age or uninformed persons unless they were adequately supervised by a responsible adult person to ensure that they can use the appliance safely.
Never use the charger without supervision, please stop using the charger and refer to the manual if you encounter any functional abnormality.
Keep the charger away from dust, humidity, rain, low and high temperature, as well as avoid direct exposure to the sunlight and intense vibration.
Place the charger on a heat-resisting, non-flammable and insulating surface. Do not use it on the car’s seats, carpet or other similar places. Keep inflammable and explosive objects away from operation areas of the charger.
Only operate this device in a cool ventilated area.
Read the instruction manual carefully to be familiar with the features of the charger, and set proper charging parameters before operating. Setting the parameters incorrectly and or failure to observe safety procedures may and will result in damage to the product, personal property and cause serious injury as well.
Never attempt to charge primary (non-rechargeable) batteries.
Batteries pose a severe risk of fire if not properly handled.
This unit may emit heat during use.

Specification

DC input	10–30 V max. 20 A
Battery type	LiPo/LiHV/ULiHV/LiFe/Lion: 1~6S