Jump to content

Translations:KAVAN R6L - User manual/14/en

From KAVAN RC Wiki
Revision as of 12:16, 18 May 2026 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Ensure stabilisation is enabled & Complete the 6-axis calibration for the gyroscope
  2. Servo connection & Build the stabilisation device for the model
  3. Set up the mixer channels and input controls
  4. Determine the [Wing Type] & [Mounting Type]
  5. Gain and Offset settings for stabilised flight modes
  6. Stabilised channel output checks in Auto-Level mode
  7. Radio stick control checks in Manual mode
  8. Calibration (Level, Stick Center & Range) for Stab Group 1 & 2
  9. Angle Mode - Roll/Pitch Degree Configuration (Optional)
Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_R6L_-_User_manual/14/en&oldid=49769"