Translations:KAVAN R10 - User manual/31/en: Difference between revisions

From KAVAN RC Wiki
VisualWikitext
(Importing a new version from external source)
 
(Importing a new version from external source)
 
Line 1: Line 1:
=== First steps - stabilisation function (R10 Stabi) ===
=== First steps - stabilisation function (R10 Stabi) ===
# Model Creation & Make sure the connected receiver is bound to the radio;
# Create a model and make sure the connected receiver is paired with the radio.
# Ensure stabilization is enabled & Calibrate the gyroscope sensor of the device;
# Ensure stabilisation is enabled and calibrate the gyroscope sensor of the device.
# Servo connection & Build the stabilization device to the model;
# Connect the servos and attach the stabilisation device to the model.
# Set up the mixer channel and radio switches;
# Set up the mixer channel and radio switches.
# Determine the [Wing Type] & [Mounting Type];
# Determine the [Wing Type] & [Mounting Type].
# Check the stabilized channel outputs of the receiver in the Auto-Level mode;
# Check the stabilised channel outputs of the receiver in the Auto-Level mode.
# Check the stick control of the transmitter in the manual mode;
# Check the stick control of the transmitter in the manual mode.
# Self-Check of the receiver;
# Start the Self-Check of the receiver.
# Failsafe setting.
# Fail-safe setting.

Latest revision as of 11:12, 13 December 2024

Message definition (KAVAN R10 - User manual)
=== First steps - stabilisation function (R10 Stabi) ===
# Create a model and make sure the connected receiver is paired with the radio.
# Ensure stabilisation is enabled and calibrate the gyroscope sensor of the device.
# Connect the servos and attach the stabilisation device to the model.
# Set up the mixer channel and radio switches.
# Determine the [Wing Type] & [Mounting Type].
# Check the stabilised channel outputs of the receiver in the Auto-Level mode.
# Check the stick control of the transmitter in the manual mode.
# Start the Self-Check of the receiver.
# Fail-safe setting.

First steps - stabilisation function (R10 Stabi)

  1. Create a model and make sure the connected receiver is paired with the radio.
  2. Ensure stabilisation is enabled and calibrate the gyroscope sensor of the device.
  3. Connect the servos and attach the stabilisation device to the model.
  4. Set up the mixer channel and radio switches.
  5. Determine the [Wing Type] & [Mounting Type].
  6. Check the stabilised channel outputs of the receiver in the Auto-Level mode.
  7. Check the stick control of the transmitter in the manual mode.
  8. Start the Self-Check of the receiver.
  9. Fail-safe setting.
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_R10_-_User_manual/31/en&oldid=28780"