KAVAN Smart PRO Opto ESCs - Instruction manual: Difference between revisions

From KAVAN RC Wiki
VisualWikitext
No edit summary
No edit summary
Line 72: Line 72:
|-
|-
|'''LiFe articles'''
|'''LiFe articles'''
|
|3–14
|
|4–16
|
|4–14
|
|4–16
|
|4–14
|-
|-
|'''Battery/motor cables'''
|'''Battery/motor cables'''
|
|4 mm²/2.5 mm²
|
|4 mm²/4 mm²
|
|4 mm²/4 mm²
|
|6 mm²/6 mm²
|
|6 mm²/6 mm²
|-
|-
|'''Circuit antispark'''
|'''Circuit antispark'''
|
|No
|
|Yes
|
|Yes
|
|Yes
|
|Yes
|-
|-
|'''Recommended connectors'''
|'''Recommended connectors'''
|
|G4 (75A) XT90 (90A)
|
|G5.5 (150A)
|
|G5.5 (150A)
|
|G8 (170A)
|
|G8 (170A)
|-
|-
|'''Temperature range'''
|'''Temperature range'''
|
| colspan="5" | -10÷110°C
|
|
|
|
|-
|-
|'''PWM frequency'''
|'''PWM frequency'''
|
| colspan="5" |20kHz
|
|
|
|
|-
|-
|'''Operating current'''
|'''Operating current'''
|
| colspan="3" |50mA
|
| colspan="2" |60mA
|
|
|
|-
|-
|'''Standby current'''
|'''Standby current'''
|
| colspan="3" |4mA
|
| colspan="2" |10mA
|
|
|
|-
|-
|'''Propeller positioning'''
|'''Propeller positioning'''
|
| colspan="5" |With additional Hall sensor
|
|
|
|
|-
|-
|'''Telemetry'''
|'''Telemetry'''
|
| colspan="5" |Duplex EX, Multiplex MSB, Futaba S.Bus2,  Graupner Hott, PowerBox P2Bus, Spectrum SRXL2™
|
|
|
|
|-
|-
|'''Status LED'''
|'''Status LED'''
|
| colspan="5" |Yes
|
|
|
|
|-
|-
|'''Active brake'''
|'''Active brake'''


'''(freewheeling)'''
'''(freewheeling)'''
|
| colspan="5" |Yes
|
|
|
|
|-
|-
|'''BEC'''
|'''BEC'''
|
| colspan="5" |No
|
|
|
|
|-
|-
|'''Optical isolation'''
|'''Optical isolation'''
|
| colspan="3" |Gas input only
|
| colspan="2" |Complete
|
|
|
|-
|-
|'''Maximum speed'''
|'''Maximum speed'''
|
| colspan="5" |> 300 000 eRPM (two-pole motor)
|
|
|
|
|}
|}

Revision as of 08:58, 11 July 2024

Introduction

Smart Programmable Electronic Controllers for Brushless Motors

Congratulations on your purchase of a KAVAN Smart PRO line electronic speed controller for brushless motors. The KAVAN Smart PRO product line represents advanced brushless motor controllers for use exclusively in RC model aircraft. With integrated telemetry and various user configuration options, the controllers offer high efficiency, low weight and precise motor control. All the ESCs can be quickly programmed using your transmitter, PC or an external terminal.

Features

  • Small size combined with high power for motor control.
  • Over-voltage and under-voltage protection, over-temperature protection, motor sudden stop protection.
  • Adjustable current limiter.
  • Fast and accurate Heli/governor mode with many settings.
  • Optically isolated gas inlet.
  • Safety shutdown of the engine when the throttle pulse is lost.
  • Configurable acceleration, timing, electromagnetic brake, motor reversal, etc.
  • Low acoustic noise due to high frequency switching.
  • Automatic telemetry: Fport, can be set via Lua script. Alternative firmware Duplex EX, Hott, MSB, PowerBox P2Bus, S.Bus2, Spectrum SRXL2.
  • Telemetry (depending on the RC system): voltage, current, power, capacitance, temperature, speed, energy.
  • Zaznamenávají se minimální/maximální hodnoty telemetrie.
  • Configuration via transmitter, PC software MAV Manager or external terminal (JETIBOX/SMART-BOX).
  • Firmware update via USB interface.
  • Languages: CZ/DE/EN/FR/IT.
IBEX-80 BEX-120 IBEX-130 IBEX-200 IBEX-220
Dimensions 57×35×28 mm 58×53×24 mm 58×53×28 mm 81×63×35 mm 81×63×35 mm
Weight incl. cables 60 g 110 g 110 g 270 g 270 g
Continuous current 80A 120A 130A 200A 220A
Peak current 120A/2s 160A/2s 180A/2s 260A 280A
Supply voltage 8–51V 10–59V (max. 64V) 10–51V 12–59V (max. 64V) 10–51V
LiPo articles 3–12 4–14 4–12 4–14 4–12
LiFe articles 3–14 4–16 4–14 4–16 4–14
Battery/motor cables 4 mm²/2.5 mm² 4 mm²/4 mm² 4 mm²/4 mm² 6 mm²/6 mm² 6 mm²/6 mm²
Circuit antispark No Yes Yes Yes Yes
Recommended connectors G4 (75A) XT90 (90A) G5.5 (150A) G5.5 (150A) G8 (170A) G8 (170A)
Temperature range -10÷110°C
PWM frequency 20kHz
Operating current 50mA 60mA
Standby current 4mA 10mA
Propeller positioning With additional Hall sensor
Telemetry Duplex EX, Multiplex MSB, Futaba S.Bus2, Graupner Hott, PowerBox P2Bus, Spectrum SRXL2™
Status LED Yes
Active brake

(freewheeling)

Yes
BEC No
Optical isolation Gas input only Complete
Maximum speed > 300 000 eRPM (two-pole motor)
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=KAVAN_Smart_PRO_Opto_ESCs_-_Instruction_manual&oldid=15248"