KAVAN V20 - Updating the firmware/fr: Difference between revisions
Mr. KAVAN FR (talk | contribs) (Created page with "KAVAN V20 - Mise à jour du micrologiciel") |
Mr. KAVAN FR (talk | contribs) (Created page with "=== Introduction === Garder le firmware à jour est crucial pour s'assurer que les fonctions fonctionnent correctement.") |
||
| Line 1: | Line 1: | ||
<languages/> | <languages/> | ||
=== Introduction === | === Introduction === | ||
Garder le firmware à jour est crucial pour s'assurer que les fonctions fonctionnent correctement. | |||
<div lang="en" dir="ltr" class="mw-content-ltr"> | <div lang="en" dir="ltr" class="mw-content-ltr"> | ||
Revision as of 02:31, 20 September 2024
Introduction
Garder le firmware à jour est crucial pour s'assurer que les fonctions fonctionnent correctement.
You will need
- Computer
- ETHOS Suite software (Download: ethos.frsky-rc.com, or for advanced users: github.com/FrSkyRC)
- USB-C cable
Procedure
- Turn on the V20 in the bootloader mode by pressing and holding the multifunction knob and pressing the power button.
- Start the ETHOS Suite software.
- Connect the V20 to the computer via USB-C. Your V20 will get automatically detected and loaded in the ETHOS Suite.
- Open the Ethos menu in the left bar.
- Choose the preferred interface and audio languages you want to download.
- Press the download button next to the "WRITE OUTDATED COMPONENTS" drop-down menu.
- Wait for the update to finish.
- After the update finishes, press the "EJECT DRIVES" button.
- Disconnect the V20 from the computer and turn it off.
- Turn it on again and make sure everything works correctly.
Video tutorial
If you're not feeling confident enough after reading these steps, please follow our video tutorial.