Translations:KAVAN R10 - User manual/31/en

First steps - stabilisation function (R10 Stabi)

1. Model Creation & Make sure the connected receiver is bound to the radio;
2. Ensure stabilization is enabled & Calibrate the gyroscope sensor of the device;
3. Servo connection & Build the stabilization device to the model;
4. Set up the mixer channel and radio switches;
5. Determine the [Wing Type] & [Mounting Type];
6. Check the stabilized channel outputs of the receiver in the Auto-Level mode;
7. Check the stick control of the transmitter in the manual mode;
8. Self-Check of the receiver;
9. Failsafe setting.