Translations:KAVAN FunStik 1280mm kit - Instruction manual/48/cs

From KAVAN RC Wiki
Revision as of 11:03, 30 May 2024 by Mrs. Kavan (talk | contribs) (Created page with "'''Spalovací motor + elektromotor:''' Drill the holes for mounting bolts (usually M3 screws). Install corresponding blind nuts to the back side of the firewall (M3 blind nuts - e.g. [https://www.kavanrc.com/item/square-blind-nut-m3-20-pcs-111773 KAV0090/20] - not supplied in the kit) or glue regular hex nuts pressed into small scraps of plywood in there.")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Spalovací motor + elektromotor: Drill the holes for mounting bolts (usually M3 screws). Install corresponding blind nuts to the back side of the firewall (M3 blind nuts - e.g. KAV0090/20 - not supplied in the kit) or glue regular hex nuts pressed into small scraps of plywood in there.

Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_FunStik_1280mm_kit_-_Instruction_manual/48/cs&oldid=15048"