Translations:KAVAN Smart PRO SBEC ESCs - Instruction manual/149/en

From KAVAN RC Wiki
Revision as of 11:44, 16 July 2024 by FuzzyBot (talk | contribs) (Importing a new version from external source)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  • Direction, acceleration, timing, starting power, motor type, gear ratio, number of poles motor gear ratio - see chapter Motor settings.
  • Brake related settings - see Brake Configuration chapter.
  • Propeller positioning, PWM positioning, holding position - see Propeller positioning chapter.
  • Motor Enabled (0/1) - motor start can be enabled or disabled based on the logic state of a specific input "IN B.2" (connector pin from left to right: 1 = Hall probe input, 2 = motor enable input, 3 = 3.3V, 4 = GND). If you select "Vst.pin Log0/1", you must always pull back the throttle before starting the motor. On the other hand, if you select "Autostart Log0/1", the motor will start as soon as the logic value of the input pin allows it and the throttle position is above idle.
  • Switching - allows you to enable synchronous switching (active brake) or leave the controller in standard mode.
Retrieved from "https://wiki.kavanrc.com/w/index.php?title=Translations:KAVAN_Smart_PRO_SBEC_ESCs_-_Instruction_manual/149/en&oldid=15613"